Current File : //opt/rh/rh-python35/root/lib64/python3.5/socketserver.py
"""Generic socket server classes.
This module tries to capture the various aspects of defining a server:
For socket-based servers:
- address family:
- AF_INET{,6}: IP (Internet Protocol) sockets (default)
- AF_UNIX: Unix domain sockets
- others, e.g. AF_DECNET are conceivable (see <socket.h>
- socket type:
- SOCK_STREAM (reliable stream, e.g. TCP)
- SOCK_DGRAM (datagrams, e.g. UDP)
For request-based servers (including socket-based):
- client address verification before further looking at the request
(This is actually a hook for any processing that needs to look
at the request before anything else, e.g. logging)
- how to handle multiple requests:
- synchronous (one request is handled at a time)
- forking (each request is handled by a new process)
- threading (each request is handled by a new thread)
The classes in this module favor the server type that is simplest to
write: a synchronous TCP/IP server. This is bad class design, but
save some typing. (There's also the issue that a deep class hierarchy
slows down method lookups.)
There are five classes in an inheritance diagram, four of which represent
synchronous servers of four types:
+------------+
| BaseServer |
+------------+
|
v
+-----------+ +------------------+
| TCPServer |------->| UnixStreamServer |
+-----------+ +------------------+
|
v
+-----------+ +--------------------+
| UDPServer |------->| UnixDatagramServer |
+-----------+ +--------------------+
Note that UnixDatagramServer derives from UDPServer, not from
UnixStreamServer -- the only difference between an IP and a Unix
stream server is the address family, which is simply repeated in both
unix server classes.
Forking and threading versions of each type of server can be created
using the ForkingMixIn and ThreadingMixIn mix-in classes. For
instance, a threading UDP server class is created as follows:
class ThreadingUDPServer(ThreadingMixIn, UDPServer): pass
The Mix-in class must come first, since it overrides a method defined
in UDPServer! Setting the various member variables also changes
the behavior of the underlying server mechanism.
To implement a service, you must derive a class from
BaseRequestHandler and redefine its handle() method. You can then run
various versions of the service by combining one of the server classes
with your request handler class.
The request handler class must be different for datagram or stream
services. This can be hidden by using the request handler
subclasses StreamRequestHandler or DatagramRequestHandler.
Of course, you still have to use your head!
For instance, it makes no sense to use a forking server if the service
contains state in memory that can be modified by requests (since the
modifications in the child process would never reach the initial state
kept in the parent process and passed to each child). In this case,
you can use a threading server, but you will probably have to use
locks to avoid two requests that come in nearly simultaneous to apply
conflicting changes to the server state.
On the other hand, if you are building e.g. an HTTP server, where all
data is stored externally (e.g. in the file system), a synchronous
class will essentially render the service "deaf" while one request is
being handled -- which may be for a very long time if a client is slow
to read all the data it has requested. Here a threading or forking
server is appropriate.
In some cases, it may be appropriate to process part of a request
synchronously, but to finish processing in a forked child depending on
the request data. This can be implemented by using a synchronous
server and doing an explicit fork in the request handler class
handle() method.
Another approach to handling multiple simultaneous requests in an
environment that supports neither threads nor fork (or where these are
too expensive or inappropriate for the service) is to maintain an
explicit table of partially finished requests and to use a selector to
decide which request to work on next (or whether to handle a new
incoming request). This is particularly important for stream services
where each client can potentially be connected for a long time (if
threads or subprocesses cannot be used).
Future work:
- Standard classes for Sun RPC (which uses either UDP or TCP)
- Standard mix-in classes to implement various authentication
and encryption schemes
XXX Open problems:
- What to do with out-of-band data?
BaseServer:
- split generic "request" functionality out into BaseServer class.
Copyright (C) 2000 Luke Kenneth Casson Leighton <lkcl@samba.org>
example: read entries from a SQL database (requires overriding
get_request() to return a table entry from the database).
entry is processed by a RequestHandlerClass.
"""
# Author of the BaseServer patch: Luke Kenneth Casson Leighton
# XXX Warning!
# There is a test suite for this module, but it cannot be run by the
# standard regression test.
# To run it manually, run Lib/test/test_socketserver.py.
__version__ = "0.4"
import socket
import selectors
import os
import errno
try:
import threading
except ImportError:
import dummy_threading as threading
from time import monotonic as time
__all__ = ["BaseServer", "TCPServer", "UDPServer", "ForkingUDPServer",
"ForkingTCPServer", "ThreadingUDPServer", "ThreadingTCPServer",
"BaseRequestHandler", "StreamRequestHandler",
"DatagramRequestHandler", "ThreadingMixIn", "ForkingMixIn"]
if hasattr(socket, "AF_UNIX"):
__all__.extend(["UnixStreamServer","UnixDatagramServer",
"ThreadingUnixStreamServer",
"ThreadingUnixDatagramServer"])
# poll/select have the advantage of not requiring any extra file descriptor,
# contrarily to epoll/kqueue (also, they require a single syscall).
if hasattr(selectors, 'PollSelector'):
_ServerSelector = selectors.PollSelector
else:
_ServerSelector = selectors.SelectSelector
class BaseServer:
"""Base class for server classes.
Methods for the caller:
- __init__(server_address, RequestHandlerClass)
- serve_forever(poll_interval=0.5)
- shutdown()
- handle_request() # if you do not use serve_forever()
- fileno() -> int # for selector
Methods that may be overridden:
- server_bind()
- server_activate()
- get_request() -> request, client_address
- handle_timeout()
- verify_request(request, client_address)
- server_close()
- process_request(request, client_address)
- shutdown_request(request)
- close_request(request)
- service_actions()
- handle_error()
Methods for derived classes:
- finish_request(request, client_address)
Class variables that may be overridden by derived classes or
instances:
- timeout
- address_family
- socket_type
- allow_reuse_address
Instance variables:
- RequestHandlerClass
- socket
"""
timeout = None
def __init__(self, server_address, RequestHandlerClass):
"""Constructor. May be extended, do not override."""
self.server_address = server_address
self.RequestHandlerClass = RequestHandlerClass
self.__is_shut_down = threading.Event()
self.__shutdown_request = False
def server_activate(self):
"""Called by constructor to activate the server.
May be overridden.
"""
pass
def serve_forever(self, poll_interval=0.5):
"""Handle one request at a time until shutdown.
Polls for shutdown every poll_interval seconds. Ignores
self.timeout. If you need to do periodic tasks, do them in
another thread.
"""
self.__is_shut_down.clear()
try:
# XXX: Consider using another file descriptor or connecting to the
# socket to wake this up instead of polling. Polling reduces our
# responsiveness to a shutdown request and wastes cpu at all other
# times.
with _ServerSelector() as selector:
selector.register(self, selectors.EVENT_READ)
while not self.__shutdown_request:
ready = selector.select(poll_interval)
if ready:
self._handle_request_noblock()
self.service_actions()
finally:
self.__shutdown_request = False
self.__is_shut_down.set()
def shutdown(self):
"""Stops the serve_forever loop.
Blocks until the loop has finished. This must be called while
serve_forever() is running in another thread, or it will
deadlock.
"""
self.__shutdown_request = True
self.__is_shut_down.wait()
def service_actions(self):
"""Called by the serve_forever() loop.
May be overridden by a subclass / Mixin to implement any code that
needs to be run during the loop.
"""
pass
# The distinction between handling, getting, processing and finishing a
# request is fairly arbitrary. Remember:
#
# - handle_request() is the top-level call. It calls selector.select(),
# get_request(), verify_request() and process_request()
# - get_request() is different for stream or datagram sockets
# - process_request() is the place that may fork a new process or create a
# new thread to finish the request
# - finish_request() instantiates the request handler class; this
# constructor will handle the request all by itself
def handle_request(self):
"""Handle one request, possibly blocking.
Respects self.timeout.
"""
# Support people who used socket.settimeout() to escape
# handle_request before self.timeout was available.
timeout = self.socket.gettimeout()
if timeout is None:
timeout = self.timeout
elif self.timeout is not None:
timeout = min(timeout, self.timeout)
if timeout is not None:
deadline = time() + timeout
# Wait until a request arrives or the timeout expires - the loop is
# necessary to accommodate early wakeups due to EINTR.
with _ServerSelector() as selector:
selector.register(self, selectors.EVENT_READ)
while True:
ready = selector.select(timeout)
if ready:
return self._handle_request_noblock()
else:
if timeout is not None:
timeout = deadline - time()
if timeout < 0:
return self.handle_timeout()
def _handle_request_noblock(self):
"""Handle one request, without blocking.
I assume that selector.select() has returned that the socket is
readable before this function was called, so there should be no risk of
blocking in get_request().
"""
try:
request, client_address = self.get_request()
except OSError:
return
if self.verify_request(request, client_address):
try:
self.process_request(request, client_address)
except:
self.handle_error(request, client_address)
self.shutdown_request(request)
def handle_timeout(self):
"""Called if no new request arrives within self.timeout.
Overridden by ForkingMixIn.
"""
pass
def verify_request(self, request, client_address):
"""Verify the request. May be overridden.
Return True if we should proceed with this request.
"""
return True
def process_request(self, request, client_address):
"""Call finish_request.
Overridden by ForkingMixIn and ThreadingMixIn.
"""
self.finish_request(request, client_address)
self.shutdown_request(request)
def server_close(self):
"""Called to clean-up the server.
May be overridden.
"""
pass
def finish_request(self, request, client_address):
"""Finish one request by instantiating RequestHandlerClass."""
self.RequestHandlerClass(request, client_address, self)
def shutdown_request(self, request):
"""Called to shutdown and close an individual request."""
self.close_request(request)
def close_request(self, request):
"""Called to clean up an individual request."""
pass
def handle_error(self, request, client_address):
"""Handle an error gracefully. May be overridden.
The default is to print a traceback and continue.
"""
print('-'*40)
print('Exception happened during processing of request from', end=' ')
print(client_address)
import traceback
traceback.print_exc() # XXX But this goes to stderr!
print('-'*40)
class TCPServer(BaseServer):
"""Base class for various socket-based server classes.
Defaults to synchronous IP stream (i.e., TCP).
Methods for the caller:
- __init__(server_address, RequestHandlerClass, bind_and_activate=True)
- serve_forever(poll_interval=0.5)
- shutdown()
- handle_request() # if you don't use serve_forever()
- fileno() -> int # for selector
Methods that may be overridden:
- server_bind()
- server_activate()
- get_request() -> request, client_address
- handle_timeout()
- verify_request(request, client_address)
- process_request(request, client_address)
- shutdown_request(request)
- close_request(request)
- handle_error()
Methods for derived classes:
- finish_request(request, client_address)
Class variables that may be overridden by derived classes or
instances:
- timeout
- address_family
- socket_type
- request_queue_size (only for stream sockets)
- allow_reuse_address
Instance variables:
- server_address
- RequestHandlerClass
- socket
"""
address_family = socket.AF_INET
socket_type = socket.SOCK_STREAM
request_queue_size = 5
allow_reuse_address = False
def __init__(self, server_address, RequestHandlerClass, bind_and_activate=True):
"""Constructor. May be extended, do not override."""
BaseServer.__init__(self, server_address, RequestHandlerClass)
self.socket = socket.socket(self.address_family,
self.socket_type)
if bind_and_activate:
try:
self.server_bind()
self.server_activate()
except:
self.server_close()
raise
def server_bind(self):
"""Called by constructor to bind the socket.
May be overridden.
"""
if self.allow_reuse_address:
self.socket.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
self.socket.bind(self.server_address)
self.server_address = self.socket.getsockname()
def server_activate(self):
"""Called by constructor to activate the server.
May be overridden.
"""
self.socket.listen(self.request_queue_size)
def server_close(self):
"""Called to clean-up the server.
May be overridden.
"""
self.socket.close()
def fileno(self):
"""Return socket file number.
Interface required by selector.
"""
return self.socket.fileno()
def get_request(self):
"""Get the request and client address from the socket.
May be overridden.
"""
return self.socket.accept()
def shutdown_request(self, request):
"""Called to shutdown and close an individual request."""
try:
#explicitly shutdown. socket.close() merely releases
#the socket and waits for GC to perform the actual close.
request.shutdown(socket.SHUT_WR)
except OSError:
pass #some platforms may raise ENOTCONN here
self.close_request(request)
def close_request(self, request):
"""Called to clean up an individual request."""
request.close()
class UDPServer(TCPServer):
"""UDP server class."""
allow_reuse_address = False
socket_type = socket.SOCK_DGRAM
max_packet_size = 8192
def get_request(self):
data, client_addr = self.socket.recvfrom(self.max_packet_size)
return (data, self.socket), client_addr
def server_activate(self):
# No need to call listen() for UDP.
pass
def shutdown_request(self, request):
# No need to shutdown anything.
self.close_request(request)
def close_request(self, request):
# No need to close anything.
pass
class ForkingMixIn:
"""Mix-in class to handle each request in a new process."""
timeout = 300
active_children = None
max_children = 40
def collect_children(self):
"""Internal routine to wait for children that have exited."""
if self.active_children is None:
return
# If we're above the max number of children, wait and reap them until
# we go back below threshold. Note that we use waitpid(-1) below to be
# able to collect children in size(<defunct children>) syscalls instead
# of size(<children>): the downside is that this might reap children
# which we didn't spawn, which is why we only resort to this when we're
# above max_children.
while len(self.active_children) >= self.max_children:
try:
pid, _ = os.waitpid(-1, 0)
self.active_children.discard(pid)
except ChildProcessError:
# we don't have any children, we're done
self.active_children.clear()
except OSError:
break
# Now reap all defunct children.
for pid in self.active_children.copy():
try:
pid, _ = os.waitpid(pid, os.WNOHANG)
# if the child hasn't exited yet, pid will be 0 and ignored by
# discard() below
self.active_children.discard(pid)
except ChildProcessError:
# someone else reaped it
self.active_children.discard(pid)
except OSError:
pass
def handle_timeout(self):
"""Wait for zombies after self.timeout seconds of inactivity.
May be extended, do not override.
"""
self.collect_children()
def service_actions(self):
"""Collect the zombie child processes regularly in the ForkingMixIn.
service_actions is called in the BaseServer's serve_forver loop.
"""
self.collect_children()
def process_request(self, request, client_address):
"""Fork a new subprocess to process the request."""
pid = os.fork()
if pid:
# Parent process
if self.active_children is None:
self.active_children = set()
self.active_children.add(pid)
self.close_request(request)
return
else:
# Child process.
# This must never return, hence os._exit()!
try:
self.finish_request(request, client_address)
self.shutdown_request(request)
os._exit(0)
except:
try:
self.handle_error(request, client_address)
self.shutdown_request(request)
finally:
os._exit(1)
class ThreadingMixIn:
"""Mix-in class to handle each request in a new thread."""
# Decides how threads will act upon termination of the
# main process
daemon_threads = False
def process_request_thread(self, request, client_address):
"""Same as in BaseServer but as a thread.
In addition, exception handling is done here.
"""
try:
self.finish_request(request, client_address)
self.shutdown_request(request)
except:
self.handle_error(request, client_address)
self.shutdown_request(request)
def process_request(self, request, client_address):
"""Start a new thread to process the request."""
t = threading.Thread(target = self.process_request_thread,
args = (request, client_address))
t.daemon = self.daemon_threads
t.start()
class ForkingUDPServer(ForkingMixIn, UDPServer): pass
class ForkingTCPServer(ForkingMixIn, TCPServer): pass
class ThreadingUDPServer(ThreadingMixIn, UDPServer): pass
class ThreadingTCPServer(ThreadingMixIn, TCPServer): pass
if hasattr(socket, 'AF_UNIX'):
class UnixStreamServer(TCPServer):
address_family = socket.AF_UNIX
class UnixDatagramServer(UDPServer):
address_family = socket.AF_UNIX
class ThreadingUnixStreamServer(ThreadingMixIn, UnixStreamServer): pass
class ThreadingUnixDatagramServer(ThreadingMixIn, UnixDatagramServer): pass
class BaseRequestHandler:
"""Base class for request handler classes.
This class is instantiated for each request to be handled. The
constructor sets the instance variables request, client_address
and server, and then calls the handle() method. To implement a
specific service, all you need to do is to derive a class which
defines a handle() method.
The handle() method can find the request as self.request, the
client address as self.client_address, and the server (in case it
needs access to per-server information) as self.server. Since a
separate instance is created for each request, the handle() method
can define arbitrary other instance variariables.
"""
def __init__(self, request, client_address, server):
self.request = request
self.client_address = client_address
self.server = server
self.setup()
try:
self.handle()
finally:
self.finish()
def setup(self):
pass
def handle(self):
pass
def finish(self):
pass
# The following two classes make it possible to use the same service
# class for stream or datagram servers.
# Each class sets up these instance variables:
# - rfile: a file object from which receives the request is read
# - wfile: a file object to which the reply is written
# When the handle() method returns, wfile is flushed properly
class StreamRequestHandler(BaseRequestHandler):
"""Define self.rfile and self.wfile for stream sockets."""
# Default buffer sizes for rfile, wfile.
# We default rfile to buffered because otherwise it could be
# really slow for large data (a getc() call per byte); we make
# wfile unbuffered because (a) often after a write() we want to
# read and we need to flush the line; (b) big writes to unbuffered
# files are typically optimized by stdio even when big reads
# aren't.
rbufsize = -1
wbufsize = 0
# A timeout to apply to the request socket, if not None.
timeout = None
# Disable nagle algorithm for this socket, if True.
# Use only when wbufsize != 0, to avoid small packets.
disable_nagle_algorithm = False
def setup(self):
self.connection = self.request
if self.timeout is not None:
self.connection.settimeout(self.timeout)
if self.disable_nagle_algorithm:
self.connection.setsockopt(socket.IPPROTO_TCP,
socket.TCP_NODELAY, True)
self.rfile = self.connection.makefile('rb', self.rbufsize)
self.wfile = self.connection.makefile('wb', self.wbufsize)
def finish(self):
if not self.wfile.closed:
try:
self.wfile.flush()
except socket.error:
# An final socket error may have occurred here, such as
# the local error ECONNABORTED.
pass
self.wfile.close()
self.rfile.close()
class DatagramRequestHandler(BaseRequestHandler):
# XXX Regrettably, I cannot get this working on Linux;
# s.recvfrom() doesn't return a meaningful client address.
"""Define self.rfile and self.wfile for datagram sockets."""
def setup(self):
from io import BytesIO
self.packet, self.socket = self.request
self.rfile = BytesIO(self.packet)
self.wfile = BytesIO()
def finish(self):
self.socket.sendto(self.wfile.getvalue(), self.client_address)
Rosenblum TV: Video training, virtual workshops, classes, tutorials
RE-INVENTING THE TELEVISION NEWS BUSINESS*
A revolution in video storytelling
Creating entirely new & cost-effective production methods
From the world leaders in video production training and the creators of Character Driven Storytelling™
*and every other business that uses video
WHAT WE DO
Over the past 35 years, we have designed, built or restructured some of the most powerful news and journalism companies in the world.
We replace the traditional TV news ‘crew’ with one highly trained journalist, working alone with nothing but an iPhone.
No more TV news ‘crews’, no editors and no field producers.
This is television news done the way newspaper journalism is done – one reporter with their electronic pad and pencil.
In doing this, we can cut the cost of production by as much as 75% while increasing ratings and audience engagement.
In the place of conventional TV news ‘packages’ – ie, reporter stand up, interview, b-roll, man on the street, we marry great journalism with Netflix and Hollywood storytelling.
It’s a combination that works.
We have taken most of our clients to #1 in their respective markets.
And it’s not just for news. Any company, any profit, any NGO and anyone else who is online needs to tell their story in compelling yet cost-effective video. We can teach you to do that. Either in person or virtually.
EXAMPLES OF WHAT WE CAN TEACH YOUR STAFF TO PRODUCE
ITAY HOD
Itay Hod, MMJ with KPIX/CBS in San Francisco, took the 5-Day Intensive Video Storytelling Bootcamp in 2018.
Because he works alone, with only an iPhone, he was able to embed himself with a homeless family.
Here’s the story he produced in a one-day turn.
KIET DO
Kiet Do, an MMJ with KPIX/CBS in San Francisco, took the 5-Day Intensive Video Storytelling Bootcamp in 2021.
Here is a story he produced, all on his own, with only an iPhone and in a one-day turn.
TAYLOR SCHAUB
Taylor Schaub, an MMJ with Spectrum News 1 in LA, took the 5-Day Intensive Video Storytelling Bootcamp in 2023.
Here is a story he turned in only one day, using only an iPhone. It was the first video story he ever did and it was nominated for an Emmy.
THE BOOTCAMP
How do we convert stations and whole networks to working in this way?
Since 1988, we have run intensive 5-Day Video Storytelling Bootcamps
We have done these all over the world.
These are hands-on bootcamps, and participants learn an entirely new way of creating TV news stories.
-We shoot at a 3:1 ratio or lower, so turnaround times are fast.
-We go directly from camera to timelilne and edit – no written scripts. We work in the medium of pictures and sound.
-We are entirely character-driven.
-We are driven by pictures and real events.
-We are focused almost entirely on ’the viewer experience’.
Since 1988, more than 70,000 journalists around the world have taken our bootcamps, either in person on virtualy.
We have started to work with CBS News, bringing our ideas of character-driven storytelling to one of the most successful and biggest networks in the United States. Since beginning to work with them ratings have climbed and more importantly, audience engagement is through the ceiling.
We started New York Times Television in 1990 and it was the first paper to be brought into the world of TV. It quickly became one of the most successful non-fiction production companies in the United States. The series and documentaries we produced won many awards including multiple Emmys.
We have been working with the BBC since the year 2000 helping to convert their national news network to our visual storytelling technique. Most recently we have trained teams from their sports, documentaries, and comedy divisions to make character-driven stories using only smartphones.
For the past five years we have worked with Spectrum News to introduce and train their journalists on visual, character driven storytelling using smartphones helping to create a different kind of local news for their network of 24-Hour News Stations across the United States.
In 2006, we were approached by the United Nations. Rather than rely on news outlets, it would be much easier to train the field operatives to produce their own stories. We spent two years working with the UN, training more than 100 of their staff in bootcamps in Geneva and Nairobi.
We trained 50 print reporters at the paper to shoot and tell their own stories, in conjunction with their print work. We built a TV newsroom in their existing print newsroom – you could not ask for a better set and they began to live stream their stories in conjunction with their print work.
We spent two years with McGraw Hill, training more than 150 of their staffers, making them completely video literate. McGraw/Hill media properties we transit included Business Week, Aviation Week, (what was the name of the architecture magazine), and JD Power and Associates.
In 1990, we were approached by The Voice of America, the official broadcasting agency for the United States Government. When we met with VOA, they were only a short wave radio broadcaster, but working with them, we took them into television, launching VOA-TV.
British based Oyster Yachts makes some of the finest yachts in the world. Like every other company, they had to find a way to feed the never-ending video demands of social media – sites like Instagram and TikTok. We trained the Oyster staff to tell their own stories, using only iPhones.
We were approached by SEPA, the Scottish Environmental Protection Agency because they had to continually find a way to ‘feed the media beast’. The result was that SEPA was able to tell their own stories, whenever they wanted, and at almost no additional cost.
Michael Rosenblum has been writing about the media since 1988. His work and ideas have appeared in The Guardian, The Huffington Post, Ilkeston Life and many other publications.
He has been blogging regularly for the past 35 years on this subject. Having taught media studies at Columbia University, NYU and now the University of Oxford, he is considered an expert on this subject.
Continue reading this post or look back at previous posts.
